Can I Turn an Old Wi-Fi Router Into an Access Point?


You need just one router for your network to function, so how do you proceed when you buy a newer, better one that provides higher speeds? Do you throw it away or try to persuade someone to take it? It would be a solution, but the better option to go for is to transform it into a wireless access point as there are more benefits to reap this way.

Just place it in an area of your home where the signal is weak, connect it to your newly acquired, higher-speed device, and voila, you now have a strong Wi-Fi signal throughout the entire house, not only in certain areas like you had before. However, don’t think that this is a trivial task to take up as anyone can have trouble with it.

Simplified guidelines for experts

  1. Cover the web port of your old device to keep away from accidentally utilizing it and cancelling your diligent work later.
  2. Learn the scope of IP addresses of your recently gained gadget.
  3. Manually set the IP address of the old gadget to one of addresses of the new one which aren’t utilized.
  4. Turn off the DHCP function of the old gadget, and you are currently wrapped up.

Detailed guidelines for beginners

#1 – Cover up the port

On the off chance that there is certainly not a native AP mode in your old gadget, you need to ensure that you won’t accidentally utilize its WAN or web port as doing this will make it naturally work like a switch rather than an AP point – it is its intended purpose, all things considered. Be that as it may, realize that there are models which highlight native access point modes, and if so, you can utilize it as a LAN port and add another wired device to the system.

  • We suggest that you cover it with tape so you don’t incidentally utilize it amid the setup procedure on the off chance that it doesn’t have a native access point mode.

#2 – Learn the new IP range

When we discuss the new range of addresses, we allude to the ones of your new device. To learn them, you must connect a computer to your new gadget either utilizing a network cable or by means of Wi-Fi.

  • For Windows OS PC – Run cmd.exe, type ipconfig, press the Enter button on the keyboard, and note down the address that is situated to one side of the Default Gateway.
  • For Mac – Go to System Preferences, then Network, select the present connection, select Advanced, search for Router, and the address will appear by its side.

Since you have the address, you can utilize it to discover the range. The range you can choose from utilizes similar blends for the initial 3 groups, the only change existing in the 4th group where you can put any number from 1 to 254, except for the one that matches the present address.

#3 – Set an IP address for the old device

You have to connect a PC to your old device utilizing the same strategy from before take in its current address. Log into its web interface and go through the section where you can change the default address – this segment is generally called LAN, Setup, or Network, contingent upon the particular model you have. Now, change it to one of the IP addresses we already discussed, just not the one that the newly bought device has. Save the changes you have made and restart it for them to apply as it takes two or three minutes for these changes to be enrolled.

#4 – Turn off the DHCP function

Log into the interface of your old device, go through to the LAN or Network segment, and disable the DHCP server function. You need to do this as it is one of the functions which release addresses, something you must avoid now that you are using it as an access point. After you save the changes you have made, we recommend you restart it to ensure it appropriately enlists your actions.

#5 – Finalize

Since you are finished with the primary steps, connect your old device to the new one using a network cable. As you do this, the old device will fulfill a twofold function – as a switch and as an access point.

  • Tip: Name your old switch uniquely in contrast to your new one to effectively recognize them when you connect. Regardless if you choose to change its name or not, both devices will be part of the same network, so you won’t actually notice any drops in speed if you connect to one or the other.


You only need one router for your network to function, and when you finally decide to upgrade it with a newer, better one that provides higher speeds, what do you do with your old Wi-Fi router? Well, if you don’t want to throw your investment out, there is one convenient manner to use it – turn it into an AP!